Home › Blog › Warranty Claim Process: What a Chinese Factory Owes You

Warranty Claim Process: What a Chinese Factory Owes You and What It Doesn't

Quick Answer: A warranty claim is a document chain, not a conversation. On our line the clock and the scope are fixed in writing: 28 months from the delivery date, structural parts covered, EPDM seals treated as wear parts rather than claim items, and a claim acknowledged within 24 hours. Everything a dealer usually assumes — labour, return freight, the customer's downtime — is not in that list, and no factory owes it unless the contract says so. Industry practice shows why the paperwork decides the outcome: Tonno Pro's published claim route runs through a Return Authorization (RA) number, the serial number, photographs of the failure, and a 72-business-hour window. Those four items are a reference point for what "documented" looks like, not our terms. A dealer who captures the same four at handover wins most claims without arguing about what the factory owes.

The dealer is the party in the middle: the customer calls the dealer, and the dealer has to translate a broken canopy into something a Chinese factory can act on. That translation is the whole job. Factories rarely refuse claims out of hostility; they refuse them because the file does not answer four questions in order — which unit, what failed, is it covered, what do you want done. Get those four into one email and the conversation becomes administration instead of negotiation.

1. Why the claim fails before anyone reads it

Most rejected claims die at unit identification, not at coverage. A factory that receives "the canopy leaks, see photo" cannot trace the unit to a batch, a delivery date or a bill of materials, so the safest answer is no. The same claim with a serial number, a delivery date and a photographed label is a different document.

The order matters because each answer constrains the next: you cannot test coverage before you know the part, and cannot agree a remedy before coverage. The six steps follow that order.

2. Step 1 — Identify the unit while it is still on the pallet

Record the unit identity at goods-in, not at failure. Photograph the product label and the serial or batch marking on arrival, and file them against the invoice and the delivery date. That single photo set is what turns a complaint into a claim eighteen months later.

The delivery date is the start of the warranty clock, not paperwork. On our line coverage runs 28 months from the delivery date, so the receiving document decides whether a claim is inside the window. A dealer who dates goods-in by the container arrival keeps a defensible record.

3. Step 2 — Decide whether it is a defect or a wear part

Separate the failure from the consumable before you write to the factory. This is the step dealers skip, and it is the step that decides whether the claim is worth opening.

Item Status on our line What that means for the claim
Shell, frame and structural welds Covered for 28 months from delivery Claimable if the cause is material or workmanship
EPDM sealing strip Wear part, not a structural claim Replace as maintenance; do not open a structural claim
Damage from fitment or use Not covered A service conversation, not a warranty one

EPDM is a wear part because of what the material does: it compresses, takes a permanent set and ages under UV, and no supplier can promise a rubber profile stays elastic forever. Treating a compressed seal as structural damage wastes the one thing a dealer cannot buy back — the factory's attention on real claims. Whether water ingress from a failed seal damages anything else, and whether that is covered, is a contract question. Settle it in writing before you need it.

4. Step 3 — Build the evidence pack in one pass

Four photographs, taken in daylight, are usually enough: the label or serial marking, a wide shot of the unit fitted to the vehicle, a close-up of the failure with something for scale, and a close-up of the joint or edge where it started. No filters, no text overlays, no photo of a wet surface that could be condensation.

Two rules make the pack usable. One claim gets one folder, named by unit and date, so the factory's clerk can match it without asking. And describe the timeline — when it was fitted, when it first showed, what changed since. A failure with a date is diagnosable; a failure without one is a story.

5. Step 4 — Open the claim on the factory's clock

Send the first email complete, and ask for a claim reference in the reply. A claim number is not bureaucracy: it is the difference between a message in someone's inbox and an item in a system that has an owner and a due date. On our line the commitment is a response within 24 hours, and the useful thing to ask for in that response is the reference number plus a named contact.

Industry practice shows what a mature process looks like. Tonno Pro, as an industry reference rather than our terms, routes claims through a Return Authorization (RA) number issued before anything ships back, requires the serial number and photographs of the failure, and sets a 72-business-hour window. Those four elements — reference, unit identity, evidence, clock — are what "documented" means here. A dealer who arrives with all four is not asking for a favour; they are filing.

6. Step 5 — Agree the remedy in writing, not the fault

Close the technical argument, then settle the commercial one. There are only four remedies in this business: a replacement part, a replacement unit, a credit, or an instruction to repair locally. Ask which one applies, in writing, with the part numbers and the ship date attached.

Plan the remedy around production, not hope. Replacement parts come out of the same 15–25 working day cycle as new orders, so a part consolidated into the next container usually costs less than an air freight that arrives sooner and eats the claim's margin. Freight direction surprises dealers: under EXW the buyer controls logistics, and warranty freight is not automatically the factory's cost. If you want the factory to carry it, put it in the agreement before the first container.

7. Step 6 — Close the loop so the claim pays for itself

Log every claim with seven fields: date opened, unit identity, part, cause, remedy, direct cost, days to close. That log does three jobs a warranty policy cannot do.

It gives you a claim rate per hundred units, the only number that makes a supplier conversation factual. It gives you a handover script: if three of ten claims trace to a seal compressed by an over-tightened clamp, the fix is a two-minute conversation at delivery. And it gives you a spare-parts list — seals, latches and small hardware — so the next claim is a stock issue rather than a shipment.

8. What the factory owes you, and what it does not

The boundary is narrower than most dealers assume, and clearer than most factories admit.

The factory owes The factory does not owe
A covered structural part replaced or credited within the stated period Labour to diagnose or swap the part
A response to a complete claim within the committed time A response to a claim with no unit identity
The remedy stated in writing, with part numbers A remedy chosen by the dealer rather than the factory
A wear-parts list that names what is excluded Coverage of the wear parts on that list
A traceable claim reference Return freight, unless the contract says so
Notice of a design change that affects fitment The end customer's downtime or lost income

Read the right-hand column as a purchasing problem, not an injustice. Labour and downtime can be priced into the resale margin; the mistake is discovering them after a claim instead of before a quotation.

9. Five clauses to settle before the first container

  1. The coverage period and the event that starts it — delivery date, invoice date or goods-in date, named explicitly.
  2. The wear-parts list, by part name, not by category.
  3. The response commitment and what counts as a complete claim.
  4. Freight direction for warranty shipments, both ways.
  5. Who decides the remedy, and the spare-parts list with part numbers.

A supplier who answers all five in writing is telling you how they will behave in year three. One who answers none is telling you the same thing, earlier and more cheaply.

Sources & References

  • Tonno Pro (Lund International), published warranty claim procedure — RA number, serial number, photographic evidence and 72-business-hour window, cited as an industry reference, not as Trigallop's terms.
  • Trigallop fact-ledger, 2026-11-05 edition — 28-month warranty from delivery date, structural-parts coverage, EPDM seals as wear parts, 24-hour claim response, 15–25 working day production cycle, EXW/FOB/DAP/DDP terms (internal, A-level).

Related reading: our shipping and warranty terms · the canopy range the warranty applies to · keeping EPDM seals out of the claim file.

Frequently Asked Questions

How long is the warranty and when does it start?

On our line, 28 months from the delivery date, covering structural parts. The start event matters more than the length: confirm in writing whether your agreement counts from delivery, invoice or goods-in, because a claim in month 27 turns on that word.

Are EPDM seals covered under warranty?

No. EPDM sealing strip is treated as a wear part, not a structural claim, because the material compresses and ages with use. Keep seals in your spare-parts stock and replace them as maintenance. Whether damage caused downstream of a failed seal is covered is a contract question, so settle it in writing.

How fast will a Chinese factory respond to a claim?

Ours commits to acknowledging a claim within 24 hours. As an industry reference, Tonno Pro's process sets a 72-business-hour window and requires an RA number, the serial number and photographs — a useful benchmark for how much detail a factory needs before it can answer.

Who pays return freight on a warranty claim?

It depends on the contract, not on the warranty. Under EXW the buyer controls logistics, so warranty freight is not automatically the factory's cost. Write the freight direction into the distributor agreement — both ways — before the first shipment rather than negotiating it during a claim.

Get Your Exact Fit & Factory-Direct Quote

Send your truck model and requirements — our team replies within 24 hours.

✓ 24-hour response✓ 28-month warranty✓ 7-day inspection✓ Scan-confirmed fit