Quick Answer: A canopy that leaves our line at US$538 EXW can land in the EU at two very different costs depending on one line of customs paperwork. The EU's anti-dumping measure on Chinese aluminium extrusions — 21.2% to 32.1% under Regulation (EU) 2021/546 — covers bars, profiles and tubes under CN 7604, 7608 and 7610. It does not cover welded or fastener-connected assemblies and finished kits. A canopy declared as 7604 extrusion pays that duty; the same canopy declared as a finished 8708.29 assembly does not. The expiry review opened on 27 March 2026 keeps the measure in force while it runs. VAT then applies on top, at the destination country's standard rate — confirm it country by country — on a base that includes the duty. Classification is the largest single lever in your landed cost, and it needs your broker's written view, not ours.
Two importers can buy the identical canopy at the same US$538 EXW, ship it on the same vessel and clear it at the same port — and one pays roughly a third more at the border. The gap is the commodity code on the entry, and whether that code sits inside an anti-dumping measure that is, right now, under review but fully in force.
1. The five layers of an EU landed cost
| Layer | Applies to | Who sets it | Can you plan around it |
|---|---|---|---|
| Factory price (EXW/FOB) | Everything | You and the supplier | Yes — the only lever you own outright |
| Freight + insurance to EU port | Everything | Carrier and route | Partly — consolidation, port, Incoterm |
| Customs duty (MFN) | Everything | TARIC, by commodity code | Only by classifying correctly |
| Anti-dumping duty | Goods inside the measure's scope | European Commission | Only by producing goods outside scope |
| Import VAT | Everything | Destination member state | No — but the base depends on the layers above |
Import VAT is not avoidable: it is recoverable for a VAT-registered importer, but it is cash out at the border, charged on a base that includes duty and freight. Duty is not recoverable. Every euro of anti-dumping duty you trigger also raises the VAT you must fund.
2. What the measure covers, and what the review changes
The measure on Chinese aluminium extrusions has been in place since 2021 under Regulation (EU) 2021/546, with duties of 21.2% to 32.1% depending on the exporter. It covers CN 7604, 7608 and 7610 — bars, profiles and tubes.
On 27 March 2026 the Commission opened an expiry review (OJ C/2026/1920), following an application from European Aluminium dated 19 December 2025. Two things follow, and both hit your purchasing calendar:
- The measures remain in force during the review. No gap, no suspension, no "wait and see" window.
- A result is due within 12 months, at the latest 15 — inside your 2027 buying cycle, not after it.
The part that decides your margin is the exclusion. Welded or fastener-connected assemblies and finished kits are outside scope. The measure targets extrusions — mill shapes and tubes — not a fabricated, assembled canopy sold as a finished article.
3. The classification line: 7604 profile versus 8708.29 assembly
The whole article in one sentence: the same canopy, declared as 7604 extrusion, attracts 32.1%; declared as a finished 8708.29 assembly, it attracts 0% of that measure.
Nothing about the product changes — only what you tell customs the product is. A canopy is a welded and bolted structure with glazing, hinges, seals and a vehicle-specific mounting kit: an assembly, not a length of profile. But if the invoice says aluminium extrusions, the entry follows the paper.
- Get the code in writing before you book freight, with the reason the goods fall outside the 7604 scope recorded. A broker's written view is defensible on audit; a supplier's email is not.
- Make the invoice match the product. "Aluminium canopy, complete, welded assembly with glazing and mounting kit, for [vehicle]" is a different document from "aluminium profiles".
- Do not let the factory declare 7604 on your behalf. Under EXW and FOB the export declaration is the seller's side; import classification is yours.
We will not tell you which code applies to your shipment. That is a legal determination your broker makes. What we do is hand your broker the technical file — grades, assembly method, drawings, glazing and mounting kit scope — so it is decided on facts.
4. Worked example: one 20HQ, 25 canopies, five steps
Step 1 — Set the assumptions. Illustrative arithmetic only. These are stated assumptions, not a quotation or a landed-cost offer. One 20HQ carries approximately 25 canopies. Factory price US$538 EXW per unit. Ocean freight and insurance to an EU port assumed at US$3,200 for the container — an assumption for this example, not a rate we hold. Customs value treated as price plus freight and insurance; confirm the basis for your member state and Incoterm. No VAT rate is applied here, because VAT is set nationally.
Step 2 — Allocate freight per unit. US$3,200 ÷ 25 = US$128 per unit. Customs value: US$538 + US$128 = US$666.
Step 3 — Price the in-scope case. At 32.1%: 32.1% × US$666 = US$213.79 per unit. At 21.2% it is US$141.19 — the exporter spread is real money.
Step 4 — Price the out-of-scope case. Entered as a finished 8708.29 assembly outside the extrusion scope, the anti-dumping layer is US$0. MFN duty for that code still applies and is set by TARIC; check it with your broker.
Step 5 — Compare what you fund at the border. Per unit before VAT: US$879.79 in-scope versus US$666.00 out-of-scope — US$213.79, or 32% of customs value. Across the container: US$5,344.75 of additional duty on 25 units. That cash is not recoverable, and it is decided by a paperwork choice made weeks earlier. VAT then applies at the destination standard rate — confirm rate and base per member state — so the in-scope case carries a larger VAT bill too.
5. The E-mark premium: what you are buying
An E-mark is not a duty and does not change your commodity code. It is evidence that a component or system has been approved against the relevant UNECE regulation — what a European distributor needs before a national type-approval or inspection conversation.
- It is per product variant, not per shipment. A new cab type or glazing configuration can mean new documentation.
- It is a document set, not a sticker. Approval number, test report, manufacturer identification and technical file must match what ships. A mismatch is worse than an absence, because it looks deliberate.
- Its cost is quoted per programme, not per unit. Ask us on request rather than budgeting a guess.
The E-mark premium is small next to a 32.1% duty, and large next to nothing if it stops a container at the border. Budget it once per SKU and amortise it across expected units.
6. Building your own EU landed-cost sheet
Five rows, and the sheet survives every future order:
- Factory price and Incoterm, per SKU
- Freight and insurance per container, allocated by unit
- Commodity code, confirmed in writing by your broker, with the scope reasoning recorded
- The current anti-dumping position — reviewed before each order cycle, not copied from last year
- VAT rate and recovery position in the destination member state, confirmed by your accountant
The fourth row is the one people leave stale: a decision is due within 12 months, so a sheet built in January is a liability by the following spring.
Sources & References
- Council Implementing Regulation (EU) 2021/546 — anti-dumping duties of 21.2%–32.1% on aluminium extrusions from China, covering CN 7604, 7608 and 7610.
- European Commission, notice of initiation of an expiry review, OJ C/2026/1920 (27 March 2026) — measures remain in force during the review; conclusion due within 12 months, at the latest 15.
- Trigallop fact-ledger, 2026-11-05 edition — canopy EXW pricing from US$538, 20HQ ≈ 25 units, Incoterms, HS 8708295900, 15–25 working day lead time (internal, A-level).
Related reading: our canopy range and material specs · how to ship a canopy from China · become a Trigallop distributor.