Quick Answer: Across the 2015–2026 F-150 we list, the bed comes in three lengths: 1704 mm (5.5 ft), 2004 mm (6.5 ft) and 2479 mm (8 ft). The 5.5 ft is SuperCrew, the 6.5 ft covers SuperCrew and SuperCab, and the 8 ft is Regular Cab. A canopy is located at the bulkhead, so every millimetre you get that length wrong arrives at the rear door — as a gap above the tailgate, or a door that fouls it. That is why our first question to an F-150 buyer is "which bed", not "which year", and why any truck we have not scanned is confirmed against your VIN before we quote. Canopies from US$538 EXW, 150–500 kg static roof load by material, 28-month warranty.
Ford sells one F-150 and three beds. From 2015 to 2026 the shortest and longest differ by 775 mm, and a canopy built for one does not fit the others. Most enquiries name the truck and stop.
1. Three bed lengths, and the question each one forces
Three numbers decide if a canopy is the right part, and all three are on our fitment table.
| Bed | Length | Cabs listed, 2015–2026 | The question it forces | What goes wrong if assumed |
|---|---|---|---|---|
| 5.5 ft | 1704 mm | SuperCrew | "Is it the SuperCrew?" | A 6.5 ft unit is 300 mm too long; the rear door fouls the closed tailgate |
| 6.5 ft | 2004 mm | SuperCrew / SuperCab | "SuperCrew or SuperCab?" | A 5.5 ft unit stops 300 mm short and leaves an open gap at the tailgate |
| 8 ft | 2479 mm | Regular Cab | "Regular Cab, 8 ft?" | 475 mm is not a gap a seal closes, and not a door that can be trimmed |
| 5.5 ft Raptor | 1704 mm | SuperCrew, 2017–2026 | "Which model year?" | Wider track and trim; quoted only after the year is checked |
No bed width appears above: a canopy seals on the bed rail and against the cab, not on the tub's outer skin.
2. Why the first question is "which bed", not "which year"
A buyer who says "F-150" has supplied the one fact that does not narrow the part: three beds, one name. Year fails safely: a wrong year is caught at the scan. A wrong length passes every check at the front, then reaches the tailgate.
3. The tailgate gap is where a wrong bed length lands
A canopy is located at the bulkhead. Its front edge sits against the bed's front wall, and its rear door frame lands wherever the canopy's length puts it. The tailgate is fixed by the truck, so the gap above it is the difference between those two lengths, plus the height of the tailgate's top edge. At the bulkhead the two beds look identical; at the tailgate, 300 mm is a hole.
The gap also moves on a correctly specified truck: top caps differ by trim, a bed liner changes the height the seal lands on, and a refitted tailgate can sit low. The EPDM seal closes a designed gap, not a missing 300 mm.
Measure with the tailgate closed and the truck level: tape from the tailgate top to the underside of the canopy's rear frame, at the centre and both corners, tape in frame. A gap that looks cosmetic lets dust in within a week and water in at the first rain — and the customer reports a leaking canopy, never a short one.
4. 5.5 vs 6.5 ft: same starting price, different part
Both are quoted from US$538 EXW, and the identical figure is the trap: the price matches because the construction does, not because the canopy does.
The 5.5 ft SuperCrew is what our fitment page describes as dominating North American sales, so it is the stocking SKU. The 6.5 ft adds 300 mm and covers SuperCrew and SuperCab, so it is quoted per order more often than stocked.
5. The 8 ft bed is a different buyer
An 8 ft F-150 is a Regular Cab work truck, and at 2479 mm it is the row we confirm most carefully. It is 475 mm longer than the 6.5 ft bed and volume is low: fleet units with racks and drawers. Our fitment page lists it for 2015–2026 Regular Cab and asks buyers to confirm against scan data — treat that as the rule, not a formality. The Raptor is the other extreme: 2017–2026, 5.5 ft, SuperCrew, quoted only after the year is checked.
6. The five questions to send before anyone quotes you
- Bed length in millimetres, measured along the floor, bulkhead to tailgate opening, not along the rail tops.
- Cab type — SuperCrew, SuperCab or Regular.
- Model year and build month, not the registration date.
- The tailgate gap at three points, tailgate closed, truck level, tape visible.
- A photo of the VIN plate and one of the bed rails.
Send those five and the reply is a part number. Send "F-150" and the honest reply is a question.
7. What we will put in writing
Three figures go in writing: 1704 mm, 2004 mm and 2479 mm, for the 2015–2026 cabs above. The rest is fixed: aluminium at 2.0, 2.5 or 3.0 mm; 150–500 kg static roof load by material; 28-month warranty; canopies from US$538 EXW; EXW, FOB, DAP or DDP; a reply within 24 hours.
We will not put a millimetre figure on an unscanned truck, a gap tolerance we have not measured, or "fits all F-150". Each reads better than "confirm against your VIN" — each is how a container becomes a container of returns.
Sources & References
- Trigallop, Ford F-150 Canopy, Tonneau & Bed Accessories (fitment page, updated 2026-10) — 1704 / 2004 / 2479 mm bed lengths, 2015–2026 coverage by cab, Raptor 2017–2026, per-configuration 3D scan.
- Trigallop fact-ledger, 2026-11-05 edition — canopies from US$538 EXW, 150–500 kg static roof load, 28-month warranty, EPDM seal as a wear part, 24-hour response, EXW / FOB / DAP / DDP (internal, A-level).
Related reading: F-150 canopy fitment · our canopy range · how to measure your pickup bed.